The Super Wing incorporates two bladders to provide back-up inflation. It is designed for cold-water technical divers who need exceptional lift to counterbalance the negative buoyancy effects of thick wetsuits at depth along with their heavy gear and in order to float high above water in heavy, rough seas. The Super Wing is also ideal for any diver who carries multiple heavyweight tanks. The Super Wing employs a Gusset Control System (GCS) cord woven through tabs on the front face of the wing. The GCS cord helps the Super Wing maintain a small profile for divers traversing in tight passages and the helps compression when dumping air. The Super Wing provides up to 90 pounds/41 kgs of lift and can accommodate two 120 ft3/19 L back mounted cylinders and two 80 ft3 /11 L stage bottles. Tough, ballistic nylon outer bag protects the wing from tears and abrasion. The 15-mil urethane bladder is abrasion resistant, chemical resistant and resists the growth of microorganisms. Primary inflation hose has choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow, or Ritesource integrated octo along with either 15-inch, 22-inch or 27-inch low pressure inflation hose. Choice of 16-inch or 12-inch elbow corrugated hose with either 15-inch or 22-inch low pressure inflation hose for back up. The Super Wing is designed for use with the TransPac, TransPlate or any webbing-style harness. Made in the U.S.A.

Please note: the Super Wing is designed for use heavyweight double tanks and is not for use with single tanks.